Customization: | Available |
---|---|
After-sales Service: | Online Support |
Power Supply: | 220V 50/60Hz |
Still deciding? Get samples of US$ 25500/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
High and low temperature of cold and hot shock climate testing machine directly sold by manufacturer
Model | NG-CJ50 | NG-CJ80 | NG-CJ150 | NG-CJ225 | NG-CJ408 |
Internal Dimension (cm) | 35*35*40 | 50*40*40 | 60*50*50 | 50*75*60 | 60*85*80 |
Structure | 3-Box: High Temp Area; Low Temp Area; Test Area | ||||
Temperature range |
A: -50ºC~180ºC B: -60ºC~180ºC C: -70ºC~180ºC |
||||
High Temperature Range | RT~180ºC | ||||
Low Temperature Range |
A: RT~-50ºC B: RT~-60ºC C: RT~-70ºC |
||||
Test Area Impact Range | -40ºC ~ +150ºC | ||||
Analytical accuracy | 0.01ºC | ||||
Temperature fluctuation | ±0.5ºC | ||||
Temperature accuracy | ±2.0ºC | ||||
Temperature recovering time | ≤3~5min | ||||
Temperature switching time | ≤10sec | ||||
Heating up time | RT ~ 150ºC, < 40 min | ||||
Cooling down time | RT ~ -40ºC, < 50min | ||||
Max. Sample weight | 5kg | ||||
System noise | > 78dB |
Thermal Shock Climatic Test Chamber can be used in testing composite material and material structure's result which under continuous environment with high temperature or low temperature shock in short time; It means this product can test the material's chemical change or physics change by expansion and contraction within short time. It's application to metal, plastic, rubber, electronic etc materials and can be used for product improvement's reference.
3-Box Hot and Cold Impact Testing Chamber is divided into High Temperature Area, Low Temperature Area and Test Area three parts. Each part is a unique insulation structure, so doing hot and cold impact test.
STD, GB, JIS, JEDEC, IEC test specifications.
Perform to meet the standards and test method: GJB150.5; GJB360.7; GB/2423.22,
GB2423.1-89; GB2423.2-89; GB2423.4-89; GB/T2423.3-93; GB/T2423-93 ETC...
It applied to aviation,ships, electrical, electronics, instruments and meters; medical
equipment; civilian nuclear energy; colleges and universities; research laboratories; commodity
inspection,arbitration, and technical supervision departments; Building materials ceramic; petroleum and chemical products, for high and low temperature impact test.
1. The thermal shock tester is divided into three sections: the high temperature chamber, the low
temperature chamber and the testing chamber.
2. The color touch panel control system was made in Japan can display Chinese / English. The big size liquid-crystal LCD has been adopted.
3. High temperature shock or low temperature impact, the maximum time up to 999H, the
maximum cycle up to 9999 times.
4. All equipment is fully automatic, and all process are precisely controlled with P.L.C.S.
5. Of any part of the malfunctions, the machine will automatically shuts down and a warning light
switches on.
6. Machine can be shut down automatically in case of electrical power instabilities.
7. Euramerican imported efficient repeated compressing freezing unit, low noise, energy saving.
8. The advanced brazed plate heat exchanger produced in Sweden is adopted, at the same time, strong turbulence and smooth stainless steel surface make the inner surface of the brazed plate heat exchange channel not easy to scale. Not only the system resistance is reduced, but also overcome the size of large, poor heat transfer, low efficiency and other shortcomings.
9. Other auxiliary parts in the refrigeration system of this equipment, such as solenoid valve, filter
and so on, our unit adopts imported famous brand parts to further improve the reliability of the
equipment.