| Customization: | Available |
|---|---|
| After-sales Service: | Online Support |
| Warranty: | 2 Year |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Din Rubber And Plastic Abrasion Standard Tester
Wheel Shoe Soles Din Abrasion Testing
| Model | NG-323 DIN Rubber Abrasion Testing Machine |
|
Specimens size |
16mm, 6-15mm (D) |
|
Fixture load |
2.5N |
|
Testing load |
2.5N, 5N, 7.5N, 10N |
|
Fixture lateral displacement |
4.2mm/wheel each lap |
|
Wheel diameter |
150mm |
|
Wheel length |
460mm |
|
Wheel rotate speed |
40rpm |
|
Abrasion speed |
0.32m/sec |
|
Dip angle |
3°the angle of the specimen back shaft with vertical roller face |
| Power | 220V±10% 50HZ |
DIN Type Abrasion Tester is to measure the abrasion resistance of rubbers (vulcanized thermoset rubbers and thermoplastic elastomers) that are subject to abrasive/frictional wear in their actual service, such as tires, conveyor drive belts, and shoe soles.
Standards:
DIN-53516, ISO/DIS-4649, BS903 PART9 and GB-9867.
Priciple:
Under specified touched pressure and given area, when the sample and the abrasive paper get an angle, test the abrasion resistance of the sample on the abrasive paper with certain rank.
Wrap the abrasive paper on the roller. The sample adpress on the roller with abrasive paper to make the sample move horizontally along with the roller. Abrasion is produced on the one end of the cylinder sample. Measure the loss value of the sample and calculate the abrasion resistance according to sample density.
){kind=link}