| Customization: | Available |
|---|---|
| After-sales Service: | Online Support |
| Warranty: | 2 Year |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ASTM D6770 Ribbon Webbing Abrasion Testing Machine
Hex Bar Method Abrasion Resistance Tester of Textile Webbing Manufacturer
| Item |
NG-112 Hex Bar Abrasion Resistance of Textile Webbing |
|
Testing stations |
3 |
|
Testing speed |
(30 ± 1) times/min |
|
Test stroke |
300 ± 20mm |
|
Drum diameter |
400mm |
|
Abrasion angle |
85 ± 2 ° |
|
Test load |
(0.9±0.06) kg, (1.8±0.06) kg, (2.4±0.06) kg |
|
Six angle rods |
6.35 + 0.03mm; radius 0.5 + 0.2mm |
|
Counting mode |
Digital display |
| Power |
220V 50Hz |
Webbing Abrasion Tester is suitable for the abrasion test of all kinds of webbing using a hex bar method.
The sample and the six angle bar are rubbed at a certain angle, and the wear effect is judged under certain rotation number.
Standards:
FMVSS 209, S5 1 (d), SAE J339, MIL-T8363B, MIL-232223B Etc.
These standards only for your reference, more details please contact us.
Features:
1.The way of multi angle friction, allowing you to test precise and effective.
2.The LED digital set counter, can be arbitrarily set the number of tests, the actual number of direct test.
Significance:
Evaluate abrasion resistance of webbing and belting materials.
Textile webbing is often used for safety belts, restraint harnesses, helmet straps and cargo tie-downs. Over time, adjustment hardware or common use may cause abrasion damage and jeopardize the integrity of the webbing material. The Webbing Abrasion Tester provides a cost effective means to perform abrasion testing. Included weights permit testing of webbing with breaking strengths over 13,500 N to ASTM D6770.
Rubbing action simulates field damage in controlled laboratory setting.
A fixed weight is attached to the end of a test specimen before it is subjected to a unidirectional reciprocal
rubbing over a steel hexagonal rod, also known as a hex abrasion bar. After the specified number of test cycles, the percent retention of breaking force is calculated. Comparing results to an unabraded specimen provides a measure of how abrasion resistant the material is.
Based on established test procedures, instrument offers unique features.
A twelve inch hex abrasion bar permits testing of up to three specimens simultaneously. Thumb screws permit quick rotation or change of the hex abrasion bar. A specimen roller ensures an angle of 85° ±2° is maintained between the specimen and hex bar. Test fixture assembly is reversible and may be mounted on either right or left side.
){kind=link}