High and Low Temperature Alternating Test Chamber

• Customization: Available
• After-sales Service: Online Support
• Power Supply: 220V 50/60Hz
• Model NO.: NG-GD
• Warranty: 2 Year
• Temperature Range: C: -70 Temp ~ +150 Temp
• Temperature Fluctuation: +- 0.5 Temp
• Temperature Deviation: +- 2.0 Temp
• Cooling Rate: 1temp / Min
• Heating Rate: 3temp / Min
• Refrigerant: R404A, R23
• Application: Metal and Plastic,Rubber,Electronic....
• Product Name: High Low Temperature Test Chamber
• Function: High Temperature and Low Temperature Testing
• Transport Package: Carton Packing
• Specification: 200*200*250 cm
• Trademark: Newgoer
• Origin: China
• Production Capacity: 50

Product Description

Product Description

High and low temperature alternating test chamber

high low temperature thermal cycling test box

Specifications

Model	Inner Chamber Volume	Internal Dimensions W*H*D(cm)	External Dimensions W*H*D(cm)
NG-GD80	80L	40*50*40	90*143*100
NG-GD150	150L	50*60*50	100*153*110
NG-GD225	225L	60*75*50	110*168*110
NG-GD408	408L	80*85*60	130*178*120
NG-GD800	800L	100*100*80	150*193*140
NG-GD1000	1000L	100*100*100	150*193*160

Item	High Low Temperature Control Stability Test Environmental Chamber
Temperature Range	A : -20ºC ~ +150 ºC     B : -40ºC ~ +150 ºC        C: -70ºC ~ +150 ºC
Temperature Fluctuation	± 0.5 ºC
Temperature Deviation	± 2.0 ºC
Cooling Rate	1 ºC / min
Heating Rate	3 ºC / min
Refrigerant	R404A, R23
Standard Configuration	1 Cable hole (Φ 50,) with plug; 2 shelves

 

Application

Summary:

High low temperature test chamber is used to test or composite material structure,instant by the extremely high temperature and low temperature under continuous environment can endure degree,in order to test chemical change in shortest time caused by heat bilges cold shrink or physical damage.Applicable to metal and plastic,rubber,electronic...such as material, can caused as the basis of its product improvements or reference.   

 

Structure:
Material of inner box: stainless steel plate
Material: cold rolled steel baking paint
Insulation material: high efficient compressed glass wool
Insulation device: no fuse switch, over-temperature protection switch, fuse
Safety device: over-temperature alarm, overload protection, etc
Exhaust duct: vane design can adjust the air volume
Control formation: when the temperature reaches the set temperature, the timer will be automatically turned on. When the time arrives, the heating power will be cut off and the buzzer will prompt
Supply air circulation system: counter flow supply air circulation system
Control system: temperature to time, time to stop, buzzer stop

 

Air supply system:

1. Forced convection air supply cycle. The air source is driven by the circulation motor to drive the wind wheel through the electric heater, and the hot air is sent to the oven from the duct After use, the hot air is drawn into the duct and becomes the air source for re-heating, thus reducing the energy loss and ensuring the temperature in the box Degree of uniformity. When the door is disturbed by the opening and closing actions, the air supply circulation system can quickly recover the operating temperature.
2. Dedicated long shaft motor with high temperature resistance and power of 1HP 50Hz
3. The fan is a multi-blade turbine with high strength and is equipped with an adjustable air guide plate to make the wind path run more smoothly.

 

 Combustion Teste