Simulation of High Altitude Low Pressure Test Chamber

• Customization: Available
• After-sales Service: Online Support
• Power Supply: 220V 50/60Hz
• Model NO.: NG-SP
• Certification: CE, ISO
• Warranty: 2 Year
• Inner Material: SUS 304 Stainless Steel
• Inner Chamber Size: 600*600*600mm (or Customized)
• Outer Size: 940*780*1620mm (or Based on Inner Size)
• Display Mode: PLC Touch Screen Display (7 Inch Touch Screen) + R
• Timekeeping Period: Four-Digit Display 0~9999 (H Hour, M Minute, S Sec
• Visualization Window: 390X360mm(20mm Thick Tempered Explosion-Proof Glas
• Pneumatic: 0~100kpa(Adjustable)
• Temperature Controller: Programmable Rising
• Usage: Simulation of High Altitude Low Pressure Test Cham
• Product Name: Simulation of High Altitude Low Pressure Test Cham
• Transport Package: Carton Packing
• Specification: 200*200*250 cm
• Trademark: Newgoer
• Origin: China
• Production Capacity: 50

Product Description

Product Description

NG-SP Simulation of high altitude low pressure test chamber

Specifications

Inner chamber size	400×400×450mm (or customized)
Outer size	650×920×530mm (or based on inner size)
Temperature range	RT~200ºC
Temperature stability	±1.0ºC
Temperature uniformity	±2ºC
Temperature rising speed	5ºC/min
Temperature controller	Programmable rising

 

Application

Summary:

Simulation of high-altitude low-pressure test chamber will be fully charged in accordance with the test method specified in 4.5.1, the battery will be placed in a vacuum box at +-5 ºC, vacuum will be reduced to 11.6KPa pressure inside the box (simulated altitude of 15240m), and maintained for 6h. The battery should not catch fire, explosion, liquid leakage.

 

Structure:
Material of inner box: stainless steel plate
Material: cold rolled steel baking paint
Insulation material: high efficient compressed glass wool
Insulation device: no fuse switch, over-temperature protection switch, fuse
Safety device: over-temperature alarm, overload protection, etc
Exhaust duct: vane design can adjust the air volume
Control formation: when the temperature reaches the set temperature, the timer will be automatically turned on. When the time arrives, the heating power will be cut off and the buzzer will prompt
Supply air circulation system: counter flow supply air circulation system
Control system: temperature to time, time to stop, buzzer stop

 

Air supply system:

1. Forced convection air supply cycle. The air source is driven by the circulation motor to drive the wind wheel through the electric heater, and the hot air is sent to the oven from the duct After use, the hot air is drawn into the duct and becomes the air source for re-heating, thus reducing the energy loss and ensuring the temperature in the box Degree of uniformity. When the door is disturbed by the opening and closing actions, the air supply circulation system can quickly recover the operating temperature.
2. Dedicated long shaft motor with high temperature resistance and power of 1HP 50Hz
3. The fan is a multi-blade turbine with high strength and is equipped with an adjustable air guide plate to make the wind path run more smoothly.

 

 Combustion Teste